您好,欢迎进入中国机电产品进出口商会[请登录][免费注册] 我的办公室 |客服中心|English

  • 资讯
  • 企业

WTO/TBT通报 (2018-06-3)

来源:CCCME 时间:2019-03-26 00:00:00

1)博茨瓦纳通报BOS659-1:2017,低压开关设备-第1部分:断路器-规范G/TBT/N/BWA/79 

内容如下:
这一部分的BOS659包括主触点连接额定电压不超过1000V交流或1500V直流电路的断路器。这一部分的BOS659不包括:a)IEC60934所管辖的设备断路器(CBE);b)IEC60947-2:2009附录B管辖的剩余电流保护断路器;c)IEC60947-2:2009附录M管辖的模块化剩余电流装置(无整体电流断路装置)。
 
覆盖以下产品:
低压开关设备和控制设备(ICS 29.130.20)
 
拟批准日期:2018/12/22
拟生效日期:2019/06/22
提意见截止日期: 2018/08/24
Description of content: This part of BOS 659 covers circuit-breakers, the main contacts of which are intended to be connected to circuits with rated voltages not exceeding 1 000 V a.c. or 1 500 V d.c.This part of BOS 659 does not cover: a) circuit-breakers for equipment (CBE) covered by IEC 60934, or b) circuit-breakers that incorporate residual current protection, covered by Annex B of IEC 60947-2:2009, or c) modular residual current devices (without integral current breaking device) covered by Annex M of IEC 60947-2:2009.
 
2)博茨瓦纳通报4.BOSIEC60947-2:2016,低压开关设备和控制设备-第2部分:断路器 G/TBT/N/BWA/82
 
内容如下:
这一部分的IEC60947适用于主触点连接额定电压不超过1000V交流或1500V直流电路的断路器;还包括整体熔断式断路器的附加要求。
 
覆盖以下产品:
低压开关设备和控制设备(ICS 29.130.20)
 
拟批准日期:2018/12/28
拟生效日期:2019/06/28
提意见截止日期: 2018/08/24
Description of content: This part of IEC 60947 applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.; It also contains additional requirements for integrally fused circuit-breakers.
 
3)博茨瓦纳通报.BOSIEC60947-3:2015(Amd2),低压开关设备和控制设备-第3部分:开关、隔离器、开关隔离器和熔断器组合装置 G/TBT/N/BWA/83
内容如下:
这一部分的IEC60947适用于额定电压不超过1000V交流或1500V直流的配电电路和电机电路中使用的开关、隔离器、开关隔离器和熔断器组合装置。
 
覆盖以下产品:
灯具(ICS 29.140.40)
 
拟批准日期:2018/12/28
拟生效日期:2019/06/28
提意见截止日期: 通报之后60天
Description of content: This part of IEC 60947 applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1 000 V a.c . or 1 500 V d.c.
 
4)博茨瓦纳通报BOSIEC60335-2-8:2012+Amd1:2015,家用和类似用途电器-安全-第2-8部分:剃须刀、理发剪和类似器具的特殊要求 G/TBT/N/BWA/88
 
内容如下:
本标准涉及额定电压不超过250V的家用和类似用途的电动剃须刀、理发剪和类似器具的安全。类似器具的例子是那些用于修指甲和修脚的器具。不用于普通家庭但可能成为公共危险来源的器具,如在商店和农场由外行使用的器具,属于本标准的范围。此类器具的例子是动物剪刀、动物剪毛器和美发器具。
 
覆盖以下产品:
家庭安全(ICS 13.120)
 
拟批准日期:2018/12/28
拟生效日期:2019/06/28
提意见截止日期: 2018/08/24
Description of content: This Standard deals with the safety of electric shavers, hair clippers and similar appliances intended for household and similar purposes, their rated voltage being not more than 250 V. Examples of similar appliances are those used for manicure and pedicure. Appliances not intended for normal household use, but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops and on farms, are within the scope of this standard. Examples of such appliances are animal clippers, animal shearers and appliances for hairdressers.
 
5)博茨瓦纳通报BOSIEC60335-2-14:2016,家用和类似用途电器-安全-第14部分:厨房电器特殊要求 G/TBT/N/BWA/89
 
内容如下:
本安全标准涉及额定电压不超过250V的家用和类似用途的厨房电器的安全。 属于本标准范围电器的例子是:搅拌机,开罐器,奶油搅拌机,食品搅拌机,磨浆机,打蛋器,食品加工机,磨刀机,绞肉机,土豆削皮机,柑橘类水果榨汁机。 也可在商店、轻工行业和农场由外行使用的普通家庭和类似用途电器,属于本标准的范围。但是,如果该电器专门用于加工食品以供商业消费,则不认为该电器属于家用和类似用途。
 
覆盖以下产品:
家庭安全(ICS 13.120)
 
拟批准日期:2018/12/28
拟生效日期:2019/06/28
提意见截止日期: 2018/08/27
Description of content: This Safety Standard deals with the safety of electrical kitchen machines for household and similar purposes, their rated voltage being not more than 250 V. Examples of appliances that are within the scope of this standard are: blender, can openers, cream whippers, food mixers, graters, egg beaters, food processors, knife sharpeners, mincers, potato peelers, citrus fruit squeezers.Appliances intended for normal household and similar use and that may also be used by laymen in shops, in light industry and on farms, are within the scope of this standard. However, if the appliance is intended to be used professionally to process food for commercial consumption, the appliance is not considered to be for household and similar use only.
6)博茨瓦纳通报电动工具(ICS 25.140.20)BOSIEC60745-2-3:2010/Amd1+Amd2:2012,手持式电动工具-安全-第2-3部分:研磨机、抛光机和盘式砂光机的特殊要求 G/TBT/N/BWA/90
 
内容如下:
本安全标准涉及额定电压单相交流或直流不超过250V、三相交流不超过440V的手持式电机驱动或电磁驱动的电动工具的安全。本标准涉及所有人在正常使用和合理可预见的滥用情况下遇到的手持工具所产生的常见危害。适用于研磨机、抛光机和盘式砂光机,包括角度、直线和垂直载荷,额定容量不超过230毫米。对于研磨机,在额定容量下额定速度不超过配件的圆周速度80m/s。
 
覆盖以下产品:
电动工具(ICS 25.140.20)
 
拟批准日期:2018/12/28
拟生效日期:2019/06/28
提意见截止日期: 2018/08/27
Description of content: This Safety Standard deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools. This standard deals with the common hazards presented by hand-held tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of tools. It applies to grinders, polishers and disk-type sanders, including angle, straight and vertical loads, with a rated capacity not exceeding 230 mm. For grinders, the rated speed does not exceed a peripheral speed of the accessory of 80 m/s at rated capacity.
 
7)博茨瓦纳通报BOSIEC60745-2-14:2010/Amd2,手持式电动工具-安全-第2-14部分:刨床的特殊要求 G/TBT/N/BWA/91
 
内容如下:
本安全标准涉及额定电压单相交流或直流不超过250V、三相交流不超过440V的手持式电机驱动或电磁驱动的电动工具的安全。本标准涉及所有人在正常使用和合理可预见的滥用情况下遇到的手持工具所产生的常见危害。本标准适用于刨床。
 
覆盖的产品:
电动工具(ICS 25.140.20)
 
拟批准日期:2018/12/28
拟生效日期:2019/06/28
提意见截止日期: 2018/08/27
Description of content: This Safety Standard deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools. This standard deals with the common hazards presented by hand-held tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of tools.This standard applies to planers.
 
8)加蓬通报制动系统技术法规 G/TBT/N/KHM/4
内容如下:
本技术法规适用于M2、M3、N和O1类车辆的制动。 本技术法规不包括: •设计速度低于25公里/小时的车辆; •不与设计速度超过25公里/小时的动力驱动车辆挂接的挂车; •适用于无效驾驶员的车辆
覆盖的产品:
刹车系统
拟批准日期:
拟生效日期:  2019/06/
提意见截止日期:    通报之后60天
Description of content: This Technical Regulation applies to vehicles of categories M2, M3, N and O 1/ with regard to braking 2/.
This Technical Regulation does not cover:
vehicles with a design speed not exceeding 25 km/h;
trailers which may not be coupled to power-driven vehicles with a design speed exceeding 25 km/h;
vehicles fitted for invalid drivers.
9)加蓬通报制动系统(客车)技术法规 G/TBT/N/KHM/5
内容如下:
本技术法规适用于M1和N1类车辆的制动。 本标准不包括: •设计速度低于25公里/小时的车辆; •适用于无效驾驶员的车辆。
 
覆盖的产品:
刹车系统。
 
拟批准日期:
拟生效日期:  2019/06/
提意见截止日期:    通报之后60天
Description of content: This Technical Regulation applies to the braking of vehicles of categories M1 and N1.
This standard does not cover:
Vehicles with a design speed not exceeding 25 km/h;
Vehicles fitted for invalid drivers.
10)加蓬通报座椅安全带固定装置技术法规 G/TBT/N/KHM/6
内容如下:
本技术法规适用于: (a)M类和N类车辆的面向前方或后方、侧方座椅的成年乘员的安全带固定装置; (b)M1类车辆儿童座椅安全固定(ISOFIX)系统及儿童约束系统的ISOFIX顶部系绳固定装置。装有ISOFIX固定装置的其它类别车辆也必须符合本标准的规定
覆盖的产品:
座椅安全带固定装置
 
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期:    通报之后60天
Description of content: This Technical Regulation applies to:
(a) Vehicles of categories M and N with regard to their anchorages for safety-belts intended for adult occupants of forward-facing or rearward-facing or side-facing seats;
(b) Vehicles of category M1 with regard to their ISOFIX anchorage systems and their ISOFIX top tether anchorages intended for child restraint systems. Other categories of vehicles fitted with ISOFIX anchorages have also to comply with the provisions of this standard.
 
11)加蓬通报安全带技术法规 G/TBT/N/KHM/7
内容如下:
本技术法规适用于M、N、O、L2、L4、L5、L6、L7和T类车辆安装的单独使用的安全带和约束系统,即作为单独配件、由成人使用、位于前方、后方和侧方座位。
 
覆盖的产品:
安全带
 
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期:    通报之后60天
Description of content: This Technical Regulation on applies to Vehicles of category M, N, O, L2, L4, L5, L6, L7 and T, with regard to the installation of safety-belts and restraint systems which are intended for separate use, i.e. as individual fittings, by persons of adult build occupying forward facing, rearward-facing and side-facing seats.
 
12)加蓬通报座椅技术法规  G/TBT/N/KHM/8
内容如下:
本技术法规适用于M1和N类车辆的座椅及其固定装置和头枕的强度,以及法规No.80及其修订案No.01不包括的M2和M3类车辆的座椅及其固定装置和头枕的强度。
 
覆盖的产品:
座椅。
 
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期:    通报之后60天
Description of content: This Technical Regulation applies to the strength of seats, to their anchorages and to their head restraints, of vehicles of categories M1 and N, and to the strength of seats, to their anchorages and to their head restraints, of vehicles of categories M2 and M3, not covered by Regulation No. 80, 01 series of amendments. 1/ 2/
 
13)加蓬通报头枕技术法规 G/TBT/N/KHM/9 
 
内容如下:
本技术法规适用于符合定义类型之一的头枕装置(“头枕”是指一种装置,其功能是限制成人乘员头部相对于其躯干的向后位移,以降低在发生事故时乘客颈椎的受伤危险)
覆盖的产品:
头枕。
 
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期:    通报之后60天
Description of content: This Technical Regulation applies to head-restraint devices conforming to one of the types defined ("Head restraint" means a device whose function is to limit the rearward displacement of an adult occupant's head in relation to his torso in order to reduce the danger of injury to the cervical vertebrae of that occupant in the event of an accident).
 
14)加蓬通报标准局(ISC) G/TBT/N/KHM/10 
内容如下:
柬埔寨充气轮胎(乘用车)技术法规
覆盖的产品:
充气轮胎(乘用车)
 
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期:    通报之后60天
Description of content: This Technical Regulation covers new pneumatic tyres designed primarily, but not only, for vehicles in categories M1, O1 and O2.
It does not apply to tyres designed for
(a) the equipment for vintage cars
(b) competitions.
 
15)加蓬通报速度表技术法规 G/TBT/N/KHM/11
内容如下:
本技术法规适用于批准L、M和N类车辆的核准。
覆盖的产品:
速度表
 
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期:    通报之后60天
Description of content: This Technical Regulation applies to the approval of vehicles of categories L, M and N.
 
16)加蓬通报摩托车尾气排放技术法规 G/TBT/N/KHM/12
内容如下:
覆盖的产品:摩托车尾气排放。
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期: 通报之后60天
Description of content: This Technical Regulation applies to the emission of gaseous pollutants from positive-ignition engines of two-wheeled or three-wheeled motorcycles with an unladed weight of less than 400 kg having a maximum design speed exceeding 50 km/h and/or cylinder capacity exceeding 50 ccm.
 
17)加蓬通报摩托车噪音技术法规 G/TBT/N/KHM/13
内容如下:本技术法规适用于L3类车辆的噪声
覆盖的产品摩托车噪音
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期: 通报之后60天
Description of content: This Technical Regulation applies to vehicles of category L3 with regard to noise.
 
18)加蓬通报安全玻璃材料技术法规G/TBT/N/KHM/14
内容如下:本技术法规适用于安装在挡风玻璃或其它窗格上的安全玻璃窗材料,或作为隔离装置安装在动力驱动车辆及其拖车上的安装玻璃材料,但不包括用于照明和灯光信号装置及仪表板的玻璃以及特殊防弹玻璃。
 
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期: 通报之后60天
Description of content: This Technical Regulation applies to safety glazing materials intended for installation as windscreens or other panes, or as partitioning, on power-driven vehicles and their trailers, and to the fitting thereof, to the exclusion, however, of glazing for lighting and light-signaling devices and instrument panels, and of special bullet-proof glazings.
 
19)加蓬通报后视镜技术法规 G/TBT/N/KHM/15
内容如下:本柬埔寨技术法规适用于M类和N类车辆以及至少部分车身围住驾驶员的L类车辆安装的间接视觉装置。
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期: 通报之后60天
Description of content: This Cambodian Technical Regulation applies to the installation of devices for indirect visions on vehicles of categories M and N and on vehicles of category L with bodywork at least partly enclosing the driver.
 
20)加蓬通报重型车辆尾气排放技术法规 G/TBT/N/KHM/16
内容如下:本技术法规适用于基准质量超过2,610kg的M1、M2、N1和N2类车辆和所有M3和N3类车辆。
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期: 通报之后60天
Description of content: This Technical Regulation shall apply to motor vehicles of categories M1, M2, N1 and N2 with a reference mass exceeding 2,610 kg and to all motor vehicles of categories M3 and N3.
 
21)加蓬通报柬埔寨充气轮胎(商用车)技术法规 G/TBT/N/KHM/18
内容如下:本技术法规包括主要为M2、M3、N、O3和O4类车辆设计的新充气轮胎。但是,不适用于按速度确定的速度低于80km/h的车辆轮胎。
 
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期: 通报之后60天
Description of content: This Technical Regulation covers new pneumatic tyres designed primarily for vehicles of categories M2, M3, N, O3 and O4. However, it does not apply to tyre types identified by speed category symbols corresponding to speeds below 80 km/h.
 
22)加蓬通报驾驶员操作控制装置技术法规 G/TBT/N/KHM/19
内容如下:本柬埔寨技术法规适用于两轮摩托车和两轮轻便摩托车的驾驶员操作控制装置,包括识别控制装置、信号灯和指示灯。
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期: 通报之后60天
Description of content: This Cambodian Technical Regulation applies to two-wheeled motorcycles and two-wheeled mopeds with regard to driver-operated controls including the identification of controls, tell-tales and indicators.
23)加蓬通报摩托车充气轮胎技术法规 G/TBT/N/KHM/20
内容如下:本技术法规适用于L1、L2、L3、L4和L5类车辆的新充气轮胎。但是,不适用于专门为“越野”使用而设计的标有“NHS”(不适用于高速公路)的轮胎以及专为比赛设计的轮胎。
 
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期: 通报之后60天
Description of content: This Technical Regulation applies to new pneumatic tyres for vehicles of category L1, L2, L3, L4 and L5. However, it does not apply to tyre types designed exclusively for the "off-road" use, which are marked "NHS" (Not for Highway Service) and to tyre types designed exclusively for competitions.
24)加蓬通报转向系统技术法规 G/TBT/N/KHM/21
内容如下:本技术法规适用于M、N和O类车辆的转向设备
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期: 通报之后60天
Description of content: This Technical Regulation applies to the steering equipment of vehicles of categories M, N and O.
 
25)加蓬通报轻型车辆尾气排放技术法规 G/TBT/N/KHM/22
内容如下:
本技术法规适用于基准质量不超过2,610kg的M1、M2、N1和N2类车辆。根据制造商要求,本法规型式核准从上述车辆扩大至基准质量不超过2,840kg且符合本标准规定条件的M1、M2、N1和N2类车辆。
 
拟批准日期:  -
拟生效日期:  2019/06/
提意见截止日期:    通报之后60天
Description of content: This Technical Regulation shall apply to vehicles of categories M1, M2, N1 and N2 with a reference mass not exceeding 2,610 kg. At the manufacturer's request, type approval granted under this Regulation may be extended from vehicles mentioned above to M1, M2, N1 and N2 vehicles with a reference mass not exceeding 2,840 kg and which meet the conditions laid down in this Standard.
26)墨西哥通报墨西哥官方标准草案PROY-NOM-226-SCFI-2018:测量仪器-谷物水分含量测定-规范和测试方法 G/TBT/N/MEX/412
内容如下:
本标准草案规定了直接用于谷物贸易的仪表的技术和计量要求,以及它们在用于商业交易前必须经过的测试方法。
 
拟批准日期:  待定
拟生效日期:  通报的墨西哥官方标准作为最终标准在官方公报上公布之后180天生效
提意见截止日期:     2018/08/05
Description of content: This draft standard specifies technical and metrological requirements for meters directly used in trade in grain and the test methods that they must successfully undergo before being used in commercial transactions.
27)墨西哥通报墨西哥官方标准草案PROY-NOM-215-SCFI-2017:测量仪器-速度检测设备-规范和测试方法 G/TBT/N/MEX/416
 
内容如下:通报的墨西哥官方标准草案适用于在测量系统内采用多普勒、传感器、激光或超声波技术的速度检测设备。本墨西哥官方标准草案不适用于通过GPS、视频分析或通信网络测量速度的技术。
 
拟批准日期:  待定
拟生效日期:  通报的墨西哥官方标准作为最终标准在官方公报上公布之后6 0天生效提意提意见截止日期:    2018/08/11
Description of content: The notified draft Mexican Official Standard applies to speed detection devices employing Doppler, sensor, laser or ultrasonic technology within a measuring system.
This draft Mexican Official Standard does not apply to technologies that measure speed through GPS, video analytics or communication networks.
 

地址:北京市东城区建国门内大街18号(恒基中心)办公楼2座8层 邮编:100005

电话总机:010-58280809 传真:010-58280810,010-58280820 会员服务邮箱:member@cccme.org.cn
会员服务热线: 010-58280888,010-58280836(工作日上午8:00-12:00 下午13:30-17:00)