The coil width of this Top Roofing Ridge Cap Roll Forming Machine is usually from 300-550mm.

 The coil width of this Top Roofing  is usually from 300-550mm. The thickness of Top Roofing Ridge Cap Forming Machine is between 0.25-08mm.It can continuous form the steel sheet according to customer`s requirement, automatically cut to length. This equipment has many advantages, just like light weight, high forming speed,low noise, stable transmission, easy operation, good look and so on.

Drawings profile or finishes product pictures

General overview of Top Roofing Ridge Cap Roll Forming Machine

Working flow of Top Roofing Ridge Cap Roll Forming Machine

Uncoiler System of Top Roofing Ridge Cap Roll Forming Machine

Usage: It is used to support the steel coil and uncoil it in a turnable way.

Passive uncoil pulled by roll forming system

Loading capacity: 5T

Uncoiling width: 1000mm

Inner diameter: 450-550mm

Entry Beach of Top Roofing Ridge Cap Roll Forming Machine

Usage: Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity.It is set in the beginning of the main machine with left-right guiding. It can help the operator to make the sheet in the right direction, left side and right side can be adjusted separately by manual screw structure.

Main Roll Forming System of Top Roofing Ridge Cap Roll Forming Machine

Length of the main part: about 6500*1300*1400

Weight of main part: 3.5 tons

Voltage: 380V/50HZ 3Phase or as customer's request

Roller fixer: middle plate

Frame: 350 H steel welded

Drive mode: chain

Material of rollers:45# steel, surface hard chromium plating.

Material of shafts: 45# steel

Diameter of shafts: φ60mm

Number of rollers: 11 rollers

Main power: 3.2kw

Step-formed mechanism

Feature: it is used to make the step , the glazed tile's final formed

Material of mold: Cr12 quenched

Shearing Mechanism of Top Roofing Ridge Cap Roll Forming Machine

Feature: Ensure stability, precision and cutting speed

Function: Automatic cutting controlled by PLC

It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.

Material of blades: Cr12 quenched

Power supply: hydraulic power

Components: It contains one set of blade, one hydraulic tank and one cutter machine.

CANGZHOU ZHONGTUO ROLL FORMING MACHINERY CO., LTD

Free Member 0 Chinese Supplier