1705A Heavy Duty Hitch Vise 6IN

DESCRIPTION 

•   6” Hitch / Bench Vise with Pipe Jaws has a cast iron body and replaceable hardened steel jaws. 

•   The vise features parallel jaws and pipe jaws. 

•   Vise will mount into a 2” receiver or mount to a work bench. 

•   Anvil on the body of vise provides a convenient wide work surface. 

•   Adjustment screws allow the mounting shaft to be fit snug into the receiver. 

•   This best quality bench vise is designed for rugged applications and are ideal for industry, home use, and outdoor use. 

HITCH MOUNTING MANUAL:

WARNING:This vise is NOT rated by Class. It is intended to fit into a 2” receiver. DO NOT EXCEED THE TW (TONGUE WEIGHT) FOR THE CLASS RECEIVER THIS VISE IS 

MOUNTED INTO. 

•   The ATV is designed to be inserted into a 2-inch square hitch 

     receiver. 

•   Slide vise tube into receiver. If the vise tube has too much 

     movement, “play” within the receiver; adjust the screws (A). 

     Use a 5/16” hex key to make the adjustments. 

         o   Remove the vise and evenly adjust the top two 

             screws to remove play up and down. 

         o  Adjust the two side screws to remove play side to 

             side. 

•    Install and test for fit, making additional adjustments as 

     needed. The vise should slide into the receiver with minimal 

     resistance. 

•   Align hole in vise tube with hole in hitch receiver. 

•   Insert hitch pin (B) completely through receiver and vise tube. 

•   Install hair pin (C) through hole in hitch pin. 

LAIZHOU HONGYUAN BENCH VICE MANUFACTURE CO., LTD.

Member of CCCME Council 0 Chinese Supplier

CCCME Member

Recommended by CCCME