WDW-E Economic Electromechanical Universal Testing Machine
- Product Details
- Company Profile
Load Frame According to load capacity & test application, the load frames are available in single column, table and floor type to meet a variety of test applications. Single column machine is more suitable for biomaterials, textiles, plastic film industries where test load requires low capacity (below 5kN); Dual-column is the main choice of rubber, plastic, composites, metal & alloys, fasteners etc, where specimen needs wide test area, middle strength, and high capacity. The frames all incorporate human factor considerations in the design to ensure safety, reduce operator fatigue, and provide the highest level of flexibility. Extremely robust crosshead guidance is incorporated in all frame designs providing the highest level of lateral crosshead stiffness. Load cell is with good accuracy interchangeable for all frames allowing each frame to operate in full capacity. Safety features: The testing machine stops automatically when the change in the test force exceeds a specified value during operations. Large space in the working area: The insides of columns provide wide space for the operator. Over-stroke limiter: The range of the crosshead movement is mechanically limited. Comfortable working area The wide legroom under the load unit provides a comfortable working area for attaching and removing jigs.
WDW-E series Economic materials testing systems adopt rigid load frames, accurate load weighting system, advanced PCIE measuring & control system and intuitive modular application software. Configured with extensive range of accessories for various applications, it can provide the optimal testing solutions for your individual application needs.
WDW-E series are perfect solution for spring testing, the parameters are much better than the existing spring testing machines in the market;
WDW-E machine is ideal equipment for lower budget project where not so accurate testing results are acquitted for. It equips with reasonable configurations of top local components (load cell, servo motor & driver, encoder, standard screws), which can satisfy the ordinary testing requirements.
Applied Standards:
Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221.
Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846, EN 10002-4.
Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1
Main Specifications:
Model | WDW-S1E/2E/5E | WDW-1/2/5/10/20E | WDW-50/100E | |
Max. load | kN | 1/2/5 | 1/2/5/10/20 | 50/100 |
kgf | 100/200/500 | 100/200/500/1.000/2.000 | 5.000/10.000 | |
Load measuring range | 2%~100% of F.S | |||
Load accuracy | ±1% of the reading | |||
Deformation measuring range | 2%~100% of F.S | |||
Deformation accuracy | ±1% of the reading | |||
Position resolution | 0.001mm | |||
Position accuracy | 1% | |||
Vertical test space (mm) | 910 | 1270 | 1350 | |
Total crosshead travel (mm) | 800 | 1220 | 1300 | |
Column spacing (mm) | 150 | 400 | 570 | |
Max. tensile space (mm) | 910 | 750 | 700 | |
Max. compression space (mm) | 865 | 1080 | 1150 | |
Tensile jaw for round specimen(mm) | / 1 | Φ4~Φ14 | Φ4~Φ20 | |
Tensile jaw for flat specimen (mm) | 0~8 | 0-14 | 0-21 | |
Width x height of jaw (mm) | 40 x 50 | 35x55 | 40x55 | |
Compression platen diameter (mm) | Φ50 | Φ100 | ||
Bending fixture span(mm) | / 2 | 10-300 | 20-400 | |
Length of bending roller (mm) | / | 100 | ||
Diameter of bending roller (mm) | / | 10 | 20 | |
Height of bending supporter (mm) | / | 50 | 90 | |
Frame axial stiffness (kN/mm) | 8 | 30 | 250 | |
Power supply | 1 phase, 220V/110V, 50Hz/60Hz | |||
Power (kW) | 0.4 | 1 |
Jinan Testing Equipment IE Corporation
Location:Jinan,Shandong,China
We are Jinan Testing Equipment IE Corporation Yinfeng Group, a professional manufacturer of testing equipments for the evaluation of the strength and performance of materials and components, such as tension, compression, bending/flexure, shearing, peeling, Charpy & Izod impact, fatigue, torsion, creep & rupture, friction & wear, hardness. Our products conform to ISO9001 and CE and are produced as per ASTM, ISO, EN etc. standards. Also we accept cooperation on OEM and ODM basis as we do with some famous brands in the world.
Being sole agent of Epsilon Extensometer in China with rich experience deformation measuring filed, we can provide various solutions, such as clip-on extensometer, video extensometer, laser extensometer, full automatic extensometer etc.
Please contact with me freely if you have any inquiries.
Thanks & best regards Catherine Liu Jinan TE Corporation Yinfeng Group HQ: Floor 10th Tower A Century Fortune Plaza, High Tech. Development Zone, Jinan, 250101, China Email:catherine@jinan-te.com; catherine@testingequipmentie.com Tel: +86-531-8651-0531-Ext. 8015 Fax: +86-531-8651-0535 Mobile/Whatsapp: +86-156-288-29299 Exclusive distributor of Epsilon Extensometers in China
|