Automatic paper food container making machine

Fully automatic design, integrating the four processes of forming, drying, shaping and edge cutting

Forming unit decription

The upper and lower mold bases of the forming part are made of stainless steel, the template size is 880 * 880mm; full pneumatic control, the minimum closing height is 120mm, the lifting stroke is 400mm.

Drying&Hot-press unit

Two sets of hot-pressing working stations, the template size is 820 * 820mm, the upper and lower mold bases of this part are made of cast iron, between bases and molds, was equipped with insulation board, vacuum board, aluminum alloy heating board. The whole unit is protected by aluminium silicate insulation material, and the outer layer is a stainless steel layer. The process was driven by Gas-liquid booster system (Including throttle valve, pressure regulating valve, quick exhaust valve, two-piece connection and pipeline etc.) and the maximum pressure is 28T. The minimum closing height is 140mm, and the lifting stroke of the hot press upper die is 450mm. The food box/plate was carried by the robot arm, from forming unit to drying/hot-press unit and edge cutting unit.

Edge cutting unit

The edge-cutting process driven by Gas-liquid booster system  (Including throttle valve, pressure regulating valve, quick exhaust valve, two-piece connection and pipeline etc.) and the pressure is 40~73T. The robot arm carries the food box/plate out to the collection unit. The cutting template made of high-strength steel, the stainless steel knife is made by Japan.

Remarks

• All these three working unit were equipped with Light curtain sensor.
• Heating method: Full electric heating (electric heating power: 64kW).
• Control system: PLC + touch screen control, main electrical components adopt Siemens brand.
• Motor power: 1.5kW * 1set, heating power: 64kW
• All parts in contact with water, including slurry tanks, pipes, etc., are made of stainless steel.
• Product size range: height <80mm, thickness <1.5mm.
• Production efficiency: 19-30 seconds/die (depending on the product).
• The whole production process is automatically completed.

MACHIMPEX NINGBO LIMITED

Experience Member 0 Chinese Supplier

Recommended by CCCME